China 2BV2060 0.81kw 27m3/H Liquid Ring Vacuum Pump crank and sprocket

Merchandise Description

2BV series h2o ring vacuum pumps and compressors

Solution Description

2BV2, 2BV5, are suited for pumping dry and damp gases, largely non-flammable, non-corrosive atmospheres and atmospheric/vapor mixtures. 2BV6 is suitable for pumping flammable and explosive gases and for flammable and explosive doing work environments. The doing work fluid is generally water. Stainless steel pumps are ideal for applications with far more demanding corrosion and sanitary specifications. 2BV vacuum pumps are employed in the tough vacuum variety and the final vacuum is determined by the saturated vapor force of the working fluid.
Greatest vacuum
The ultimate vacuum is dependent on the operating temperature and the sort of functioning fluid utilised. Make sure you notice the subsequent details: a pump with out cavitation security, suction force have to not be significantly less than eighty mbar, this is to keep away from the h2o temperature of fifteen ºC, the temperature of the pumped dry air at 20 ºC in the pump caused by cavitation, the greater the temperature, dependent on the working fluid saturated vapor force, the bare minimum suction stress authorized will also be larger. The larger the temperature, the lower the suction capability. Observe: 2BV vacuum pumps running for a long time under the least allowable suction stress will trigger hurt to the pump.
Greatest exhaust strain
The maximum allowable exhaust pressure is 1200 mbar for 2BV2 vacuum pumps and 1300 mbar for 2BV5 and 2BV6 vacuum pumps when using functioning fluid according to the circulation charge in the desk.
Pumped gases or vapors
The pumped gas or fuel/vapor mixture is not permitted to incorporate reliable particles, but a tiny sum of suspended subject or liquid is permitted. Table 2 displays the highest quantity of drinking water authorized to be drawn in from the suction flange. When pumping hot gases or steam earlier mentioned 80°C, it is suggested to use 2 moments the normal stream rate of operating fluid

Purposes

2BV series goods have the feature of sturdy suction potential underneath higher vacuum, which is the best vacuum pump for paper, chemical and pharmaceutical industries.

Major attributes

 1. Direct coupling connection to area and effortless to install.
2. Large top quality mechanical seal as common configuration, leakage-free of charge and maintenance-free of charge.
3. Geared up with Y2 sequence motor with defense quality IP54.
4. Sleek running, sounds can be as minimal as 62 decibels.
five. Uniform corrosion-resistant design, aluminum bronze impeller is employed to increase the corrosion resistance of the pump, stainless steel impeller is optional and can be employed for the harsh application environment.
6. The unique layout of the discharge port can safeguard the pump from the more than-force to make certain the ideal performance.

Complex data

Model Motor power Max pumping velocity   Final strain Suction Relationship Discharge Connection  Bodyweight Curve code
  KW m³/min m³/h hpa mm mm kg  
2BV2060 .81 .forty five 27 33 G1” G1” 32 60V
2BV2061 1.forty five .87 52 33 G1” G1” 33 61V
2BV2070 two.35 one.33 80 33 G1 1/2” G1 1/2” 50 70V
2BV2071 three.eighty five 1.83 110 33 G1 1/2” G1 1/2” sixty two 71V
2BV5110 4 2.seventy five 165 33 DN50 DN50 ninety four 110V
2BV5111 five.five three.83 230 33 DN50 DN50 110 111V
2BV5121 seven.5 4.sixty six 280 33 DN65 DN65 136 121V
2BV5131 11 six.66 400 33 DN65 DN65 184 131V
2BV5161 fifteen eight.33 five hundred 33 DN80 DN80 296 161V
2BV6060 .eighty one .45 27 33 G1” G1” 2840 60V
2BV6061 1.45 .87 fifty two 33 G1” G1” 2840 61V
2BV6070 two.35 1.33 eighty 33 G1 1/2” G1 1/2” 2860 70V
2BV6071 three.85 one.eighty three one hundred ten 33 G1 1/2” G1 1/2” 2880 71V
2BV6110 4 two.seventy five a hundred sixty five 33 DN50 DN50 1440 110V
2BV6111 five.five 3.eighty three 230 33 DN50 DN50 1440 111V
2BV6121 7.5 four.sixty six 280 33 DN65 DN65 1440 121V
2BV6131 11 6.66 400 33 DN65 DN65 1440 131V
2BV6161 15 eight.33 500 33 DN80 DN80 970 161V

Be aware: 2BV6060~2BV6161 is Anti- Explosion design.

Strain diagram

FAQ

Q: What data must I offer you for an inquiry?
A: You can inquire primarily based on the product straight, but it is constantly suggested that you speak to us so that we can assist you to verify if the pump is the most appropriate for your software.

Q: Can you make a personalized vacuum pump?
A: Yes, we can do some special types to meet customer applications. Such as customized sealing programs, speical surface therapy can be used for roots vacuum pump and screw vacuum pump. You should get in touch with us if you have unique specifications. 

Q: I have issues with our vacuum pumps or vacuum techniques, can you offer you some help?
A: We have application and design engineers with much more than 30 a long time of encounter in vacuum apps in various industries and assist a good deal of buyers resolve their difficulties, such as leakage problems, vitality-saving solutions, far more environment-friendly vacuum techniques, and many others. You should contact us and we are going to be extremely satisfied if we can supply any support to your vacuum program.

Q: Can you layout and make custom-made vacuum techniques?
A: Sure, we are very good for this.

Q: What is your MOQ?
A: 1 piece or 1 set.

Q: How about your shipping and delivery time?
A: 5-10 functioning times for the regular vacuum pump if the amount is below twenty items, 20-thirty doing work days for the conventional vacuum system with less than 5 sets. For far more amount or special needs, please contact us to check the guide time.

Q: What are your payment terms?
A: By T/T, 50% advance payment/deposit and fifty% paid out ahead of cargo.

Q: How about the guarantee?
A: We offer you 1-calendar year warranty (besides for the wearing parts).

Q: How about the provider?
A: We supply remote video technical assist. We can send out the provider engineer to the website for some specific requirements.

 

 

 

 

 

US $500
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Online Video Instruction
Warranty: 1 Year
Vacuum Degree: Vacuum
Max Pumping Speed: 27m3/H
Motor Power: 0.81kw
Ultimate Pressure: 33hpa

###

Model Motor power Max pumping speed   Ultimate pressure Suction Connection Discharge Connection  Weight Curve code
  KW m³/min m³/h hpa mm mm kg  
2BV2060 0.81 0.45 27 33 G1” G1” 32 60V
2BV2061 1.45 0.87 52 33 G1” G1” 33 61V
2BV2070 2.35 1.33 80 33 G1 1/2” G1 1/2” 50 70V
2BV2071 3.85 1.83 110 33 G1 1/2” G1 1/2” 62 71V
2BV5110 4 2.75 165 33 DN50 DN50 94 110V
2BV5111 5.5 3.83 230 33 DN50 DN50 110 111V
2BV5121 7.5 4.66 280 33 DN65 DN65 136 121V
2BV5131 11 6.66 400 33 DN65 DN65 184 131V
2BV5161 15 8.33 500 33 DN80 DN80 296 161V
2BV6060 0.81 0.45 27 33 G1” G1” 2840 60V
2BV6061 1.45 0.87 52 33 G1” G1” 2840 61V
2BV6070 2.35 1.33 80 33 G1 1/2” G1 1/2” 2860 70V
2BV6071 3.85 1.83 110 33 G1 1/2” G1 1/2” 2880 71V
2BV6110 4 2.75 165 33 DN50 DN50 1440 110V
2BV6111 5.5 3.83 230 33 DN50 DN50 1440 111V
2BV6121 7.5 4.66 280 33 DN65 DN65 1440 121V
2BV6131 11 6.66 400 33 DN65 DN65 1440 131V
2BV6161 15 8.33 500 33 DN80 DN80 970 161V
US $500
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Online Video Instruction
Warranty: 1 Year
Vacuum Degree: Vacuum
Max Pumping Speed: 27m3/H
Motor Power: 0.81kw
Ultimate Pressure: 33hpa

###

Model Motor power Max pumping speed   Ultimate pressure Suction Connection Discharge Connection  Weight Curve code
  KW m³/min m³/h hpa mm mm kg  
2BV2060 0.81 0.45 27 33 G1” G1” 32 60V
2BV2061 1.45 0.87 52 33 G1” G1” 33 61V
2BV2070 2.35 1.33 80 33 G1 1/2” G1 1/2” 50 70V
2BV2071 3.85 1.83 110 33 G1 1/2” G1 1/2” 62 71V
2BV5110 4 2.75 165 33 DN50 DN50 94 110V
2BV5111 5.5 3.83 230 33 DN50 DN50 110 111V
2BV5121 7.5 4.66 280 33 DN65 DN65 136 121V
2BV5131 11 6.66 400 33 DN65 DN65 184 131V
2BV5161 15 8.33 500 33 DN80 DN80 296 161V
2BV6060 0.81 0.45 27 33 G1” G1” 2840 60V
2BV6061 1.45 0.87 52 33 G1” G1” 2840 61V
2BV6070 2.35 1.33 80 33 G1 1/2” G1 1/2” 2860 70V
2BV6071 3.85 1.83 110 33 G1 1/2” G1 1/2” 2880 71V
2BV6110 4 2.75 165 33 DN50 DN50 1440 110V
2BV6111 5.5 3.83 230 33 DN50 DN50 1440 111V
2BV6121 7.5 4.66 280 33 DN65 DN65 1440 121V
2BV6131 11 6.66 400 33 DN65 DN65 1440 131V
2BV6161 15 8.33 500 33 DN80 DN80 970 161V

Problems with sprockets

If you’re having trouble with your HP Sprocket, you’re not alone. This bike component isn’t without issues, but it’s also susceptible to other wear and tear. Check for worn tooth surfaces and hooked tips. When teeth wear out quickly, they can break the chain, so make sure you fix them as soon as possible.
You can solve this issue by installing the latest firmware update for your Sprocket printer. The firmware update is designed to provide a safe and reliable printing experience. When your Sprocket printer doesn’t print the pictures, it is likely because it’s not receiving enough power from the battery. Make sure the battery is at least 25% before you begin.
Insufficient or improper lubrication can cause a variety of problems. Proper lubrication can prevent or remove excessive wear, or protect the chain from the environment. It can also reduce the risk of excessive chain slack. The following are just a few common problems that can cause slack in the chain.
In case of excessive wear, a new sprocket may be necessary. If the sprocket and chain do not match, replace them with a similar size. In addition, a shock absorber can be installed to minimize load. Another alternative is to install a take-up idler, which helps prevent excessive chain elongation.
Improper alignment of the sprocket is another common cause of chain drive problems. If the sprocket is not aligned correctly, it will not be able to move smoothly through the chain during rotation. The teeth of the sprocket will become hooked, preventing the roller from smoothly moving through. This will force the roller chain to cling to the sprocket, and need to be replaced.
sprocket

Common types of sprockets

Power transmission equipment typically utilizes sprockets and chains. These are used in pairs to provide speed reduction. They are different from gears because the teeth of the sprocket do not mesh with those of the mating gears. They are typically made of plastic, but they can also be made of metal.
There are many common types of sprockets and chains. Some of these types of sprockets have large, narrow, or variable tooth pitch. The size of the sprocket depends on the size and pitch of the chain. If you are using a chain with a large pitch diameter, you should use a sprocket with large teeth. Conversely, a smaller pitch diameter will require a sprocket with small teeth.
Another way to identify the type of sprocket you’re using is to look at the number of strands. Single-strand sprockets are the most common, but you’ll also find many types that have multiple strands of chains. Multi-strand chains are generally larger and allow for greater torque to be transmitted from a common central shaft.
Another type is flat sprockets, which have no hub and drive through a series of holes. They are used for transmission of power or material in chain-driven systems, such as bicycles. They can also be used for overhead conveyors. In some cases, there is a special type that fits the shaft of an automobile, such as a transmission shaft.
There are many different types of sprockets, each with a unique function. Some are used for conveyor chains, while others are used for other applications. In most cases, sprockets are used in chain-driven machinery. They come in different sizes and pitches and are designed to work with particular types of chains.
When choosing a motor or transmission system, it is important to match sprockets and chains. A perfectly matched set of components will ensure that the motor and transmission work together. Generally, this alignment comes down to sprocket-to-sprocket matching. The process involves jacking up the motor and lining up the sprockets and chains. Then, the sprockets and chains are locked into place with cotter pins.
sprocket

Size of sprockets

To determine the correct chain length and sprocket diameter, the first step is to understand the difference between the diameters of the sprockets and cassettes. The smaller the diameters of sprockets, the lower the chain tension. The larger the sprocket, the longer the chain will need to be. This process requires the use of a derailleur that can roll a larger number of chains.
In addition to chain length, the spacing between sprockets is another important factor. If the sprockets are too far apart, the chain may slip through the sprocket. A smaller range of sprockets will prevent this and will increase the number of discrete gear ratios. In addition, if the chain skips over a sprocket, it will cause discomfort in shifting.
Choosing the correct size of sprockets is essential for cycling. Larger sprockets are usually necessary for road bikes. Likewise, a road bike will have larger gears than a gravel bike. Larger gears will help the cyclist accelerate more smoothly and ensure a smoother ride.
Using a chain calculator can help you determine the proper size of sprockets for your bike. You can also use a chain length calculator to determine the correct chain length. This calculator uses the distance between the sprockets to calculate chain length. However, it is important to note that it is not possible to calculate the length of a chain with a single sprocket.
The size of the sprocket must be in proportion to the length of the chain. It can be controlled by either adjusting the center of the sprocket or moving it to the proper position. The center of rotation of the sprocket is defined by the chosen geometry reference.
The report covers global and regional sales of sprockets. It also contains information on competitive dynamics and market concentration status. Moreover, the report includes detailed information about the manufacturers of sprockets. The study also includes regional and global market forecasts. It also provides a detailed breakdown of sales by type, application, and region.
When choosing the right size of sprockets, remember to take measurements and do some arithmetic. For example, a smaller countershaft sprocket will improve low-speed acceleration, while a larger rear sprocket will improve fuel mileage. In addition, it is recommended that you use the reverse sprocket size if you’re going to be riding on long highways.
sprocket

Maintenance of sprockets

Proper maintenance of sprockets and chains is crucial to the functioning of your bike. It is important to avoid overstretching them. If this happens, they will not fit properly and will require replacement. It is also important to prevent the kinks in your chain to reduce the amount of stress on your sprockets.
If you are unsure of the state of your sprockets and chains, you can replace them with a new chain and a new sprocket. If you notice that a chain is squeezing between the rear sprocket, it is time to replace the sprocket.
Proper maintenance of sprockets and chains involves cleaning and lubrication. Regular cleaning and lubrication can prevent damage and extend the life cycle of these parts. Proper lubrication will also ensure their smooth operation and minimize the noise. Regardless of whether your sprockets or chains are new or used, lubrication should be carried out at regular intervals to extend their useful life cycle.
Proper alignment of the sprockets and chains will ensure the most efficient performance and reliability. If you regularly change your chain and sprockets, you can prolong the life of these components and avoid costly repairs. Make sure you change the sprockets and chains only with professional mechanics. Always follow the instructions of the motorcycle manufacturer.
Proper maintenance of sprockets and chains is important to prevent premature sprocket replacement. Changing the sprocket too often can result in poor meshing, accelerating wear and tear of the new sprockets. When changing the sprocket, it is essential to turn the worn surface over before you install the new one.
It is important to follow the instructions and warning signs for proper maintenance of sprockets and chains. The safety of the workers and the environment should be prioritized. Follow the instructions of the manufacturer and avoid dangerous situations. It is essential not to anneal or electroplate the chain parts.
Proper lubrication is also vital. Use a non-petroleum based cleaner to clean the chain thoroughly and then apply lubricant. Avoid using engine oil as it is more viscous and cannot protect the chain against water.

China 2BV2060 0.81kw 27m3/H Liquid Ring Vacuum Pump     crank and sprocketChina 2BV2060 0.81kw 27m3/H Liquid Ring Vacuum Pump     crank and sprocket
editor by czh2022-11-25